公司新聞
冷再生機出租淺談水泥路面冷再生機的發展分析！
來源：http://grglc.com/ 日期：2020-09-04
智能冷在生機的基點是國際先進品牌的配置與性能，采用高配置、實現高品質，再生過程中，含水量或瀝青量、作業速度、拌和深度全自動智能控制，實現GPS定位、遠程故障診斷，性能達到世界先進水平，其先進性、可靠性完全值得信賴的新一代水泥路面再生機械。
The key point of intelligent cooling is the configuration and performance of international advanced brands. The intelligent control of water content, asphalt content, operation speed and mixing depth is realized by adopting high configuration, high quality, regeneration, high quality, and GPS positioning, remote fault diagnosis, and the advanced performance and reliability of the new generation of cement pavement recycling machinery. 。
以冷再生機為例，它配備了如下先進的智能控制系統：1. 動力采用康明斯發動機，功率為500HP。
Take the rental of cold regenerator as an example, it is equipped with the following advanced intelligent control system: 1. Cummins engine is used as power, and the power is 500hp.
2. 作業轉子驅動采用機械（皮帶）傳動，動力傳動比液壓傳動效率提高25%，皮帶傳動使沖擊載荷免于傳到發動機上，根據不同的負載情況通過置換皮帶輪可得到不同的轉速。
2. The working rotor is driven by mechanical (belt) transmission. The efficiency of power transmission is 25% higher than that of hydraulic transmission. The impact load is not transmitted to the engine by belt transmission. Different speeds can be obtained by replacing the pulley according to different load conditions.
3. 轉向方式有前輪轉向、蟹型轉向、后輪轉向、全輪轉向，因此具有良好的機動性能。
3. The steering modes include front wheel steering, crab steering, rear wheel steering and all wheel steering, so it has good maneuverability.
4. 本機具有功率自動分配功能，當銑拌阻力增加發動機轉速下降時，微控器能夠調節行走系統的功率，補償銑拌系統的功率，保證該機在大效率和生產率狀態下工作。
4. The machine has the function of automatic power distribution. When the milling resistance increases and the engine speed decreases, the micro controller can adjust the power of the walking system to compensate the power of the milling and mixing system, so as to ensure that the machine works under the condition of high efficiency and productivity.
5. 液體噴灑計量系統，微控器能夠根據行走速度銑拌深度及銑拌寬度自動調節噴灑量的大小，實現噴灑量的準確計量控制，滿足舊瀝青路面的再生要求。
5. The liquid spraying metering system, the micro controller can automatically adjust the spraying amount according to the walking speed, milling depth and milling width, so as to realize the accurate measurement and control of the spraying amount, and meet the regeneration requirements of the old asphalt pavement.
6. 裝備MOBA銑刨機找平系統，MOBA銑刨機找平系統專為控制銑刨機工作時的銑刨深度設計，通過傳感器對銑刨鼓相對于銑刨機機身位置的距離變化進行檢測，將變化量轉化為電信號傳輸給控制器，再由控制器自動對銑刨鼓進行調整，從而實現對銑刨深度的自動控制。
6. The MoBa planer leveling system is equipped. The MoBa planer leveling system is designed to control the milling depth when the milling machine is working. The sensor detects the distance change of the milling drum relative to the milling machine body position, converts the change into electrical signal and transmits it to the controller, and then the controller automatically adjusts the milling drum, so as to realize the automatic control of milling depth.
7. 本機具有GPS遠程故障診斷系統，使用GPS遠程監控系統，可實現設備的全球定位、設備工作信息監控、故障診斷、遠程維護和報警，以及鎖車、防盜等功能。通過嵌入式計算機技術和移動通信技術搭建的服務管理平臺，能通過網絡終端實時遠程監控，實施遠程管理。（1）能夠遠程觀測到設備所處的地理位置以及現場施工軌跡及觀測到其施工區范圍。（2）能夠進行車輛發動機各項參數、工作狀態、油壓的運行情況和運行異常報警預告的實時信息狀態查詢。
7. This machine has GPS remote fault diagnosis system. Using GPS remote monitoring system, it can realize the functions of global positioning, equipment working information monitoring, fault diagnosis, remote maintenance and alarm, as well as car locking and anti-theft. Through the embedded computer technology and mobile communication technology to build the service management platform, through the network terminal real-time remote monitoring, remote management. (1) It can remotely observe the geographical location of the equipment, the construction track and the construction area. (2) It can query the real-time information status of vehicle engine parameters, working state, oil pressure and abnormal operation alarm.
以上是關于水泥路面冷再生機的行業分析，相信大家都有所了解了，如想了解更多內容歡迎點擊冷再生機出租http://grglc.com官網。
The above is about the cement pavement cold recycling machine industry analysis, I believe you all know, if you want to know more, welcome to click the cold recycling machine rental http://grglc.com Official website.
公司地址：濟南市槐蔭區經一路273號群盛華城2號樓1-404
公司名稱：山東途暢路橋工程有限公司 
備案號：